Some tips on setting up the Fanuc reader punch RS232 interface.
eg parameter 552 for baudrate (10 is 4800 baud)
fanuc 0tc 0mc RS232 reader puncher parameters
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
fanuc 0tc 0mc RS232 reader puncher parameters
- Attachments
-
- Fanuc-0t-RS232-connections-and-troubleshooting.pdf
- (34.2 KiB) Downloaded 4236 times