Pete has used the EasySCAN 3D Laser scanning attachment to scan in a "valuable" bust of Chopin
Holding it in the rotary axis was the hardest part - he had to make cones full of blue tack to hold it between centres without damaging it.
Scanned a Chopin bust with the rotary axis
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Here are the pictures:
- Attachments
-
- Here is how Pete held the bust to do the rotary 3D scan
- scanning-chopin.JPG (66.16 KiB) Viewed 6732 times
-
- The final scan (its about an 18Mb STL file) NB, this model is completely raw data from the scanner - no editing has been done
- animated.gif (1.24 MiB) Viewed 6738 times
-
- The original bust before scanning
- chopin-real.jpg (70.57 KiB) Viewed 6738 times