Viceroy T.D.S 1/1 G.B - Seismic Restraints

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
dazz
CNC Expert
CNC Expert
Posts: 243
Joined: Sat 19 Aug , 2006 11:31 am
Hardware/Software: Viceroy TDS 1/1GB lathe, Imperial, stripped down and rebuilt.
Viceroy Taper/Tracer attachment, Shop made cross slide tracer attachment, VSD.
Location: New Zealand

Viceroy T.D.S 1/1 G.B - Seismic Restraints

Post by dazz » Mon 04 Dec , 2006 11:12 am

Hi

New Zealand is one of those places where earthquakes are a routine event. You can view details of the latest quake here:

http://www.geonet.org.nz/latest.html

For this reason, I have attached the lathe to the wall to prevent it dancing around or falling over in a big shake. I drilled holes at each end of the tray and fitted chains as shown.

I could have bolted the lathe to the floor, but that would have been more difficult to do.
Attachments
IMG_0427.JPG
IMG_0427.JPG (56.31 KiB) Viewed 4597 times
Regards

Dazz
Top
Post Reply

Return to “User Stories / Projects / Courseware”