deck chair style mobile phone holder

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
Peter
Posts: 8
Joined: Thu 09 Mar , 2006 7:46 am
Location: Brighouse, UK

deck chair style mobile phone holder

Post by Peter » Fri 19 Dec , 2008 15:44 pm

Designed in Solid Works and then exported in QuickCAM 2D Design (via DXF)
Attachments
deck_chair.jpg
Solid Works screen shot
deck_chair.jpg (21.44 KiB) Viewed 5452 times
deck_chair.zip
This file will run in Denford QuickCAM 2D or LaserCAM 2D software. Designed for cutting out on a laser.
(61.27 KiB) Downloaded 822 times
Top
Martin
CNC Guru
CNC Guru
Posts: 1898
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: deck chair style mobile phone holder

Post by Martin » Thu 22 Oct , 2009 12:45 pm

Is it possible to open these designs in Techsoft 2D Design?
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: deck chair style mobile phone holder

Post by Denford Admin » Fri 23 Oct , 2009 15:35 pm

You can use this dxf exported from QCam2D:
Attachments
DECK_CHAIR.DXF
(22.93 KiB) Downloaded 781 times
Top
Post Reply

Return to “User Stories / Projects / Courseware”