Page 1 of 1
Slot together Fly cut on VersaLaser
Posted: Fri 02 May , 2008 9:09 am
by Steve
While out in northern Ireland last week I saw a project that had been cut on a VersaLaser.
Chris who made the part will hopefully upload the LaserCAM file for it.
Posted: Fri 02 May , 2008 10:47 am
by Matt
This is very nice indeed. Is Chris a pupil, student, technician, teacher or lecturer?
Posted: Fri 02 May , 2008 14:59 pm
by Steve
Chris is a Technician I believe and has just taken delivery of his Laser.
He found the files online then resized to suit.
Hopefully Chris will respond to this thread.
LaserCAM File For Fly
Posted: Fri 02 May , 2008 16:29 pm
by WHS
Hi all hope everyone likes the Fly! Here is the .MCM file (for laserCAM) for the fly. I have uploaded it in one file, but it needs split into 2 if the bed on your laser is 305mm X 610mm like mine. Let me know how you get on if you try this one for yourself, and if you have any questions feel free to ask!
Posted: Wed 07 May , 2008 9:22 am
by Steve
Hi Chris,
Admin has made changes so you can upload the MCM files
You may want to zip them though as they will be simpler to upload then.
Posted: Wed 07 May , 2008 10:45 am
by Matt
I found the file online, there is also a spider one. I programme for an industrial router so can cut a giant pair in 8mm. They should be over a metre across. They should look really good fixed upside down on my 3m high workshop ceiling!
Should scare small children anyway
Posted: Mon 12 May , 2008 10:07 am
by WHS
Hi Matt, Glad you like the fly. Can you either post the file or a link to it for the spider. I am in a school and we are making a collection of these models for display on openday. Thanks
Posted: Mon 12 May , 2008 10:29 am
by Matt
Hi
Here are the files I found. I was going to cut them this week but we are suddenly busy again. My ceiling decoration will have to wait for a bit.
Posted: Mon 12 May , 2008 14:24 pm
by Denford Admin
Please upload photos when you get round to making these B-movie monsters !