Converting a Legacy Ornamental Mill to CNC

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
Tommy
Posts: 1
Joined: Tue 19 Feb , 2008 16:13 pm
Location: Halifax

Converting a Legacy Ornamental Mill to CNC

Post by Tommy » Tue 19 Feb , 2008 16:22 pm

I am looking for some assistance and advice on the selection of hardware to turn the above machine to CNC operation. Located in Halifax area. Would like to hear from anyone that can help me with this project.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Wed 20 Feb , 2008 10:31 am

Have you seen this ?
https://www.youtube.com/watch?v=IKaHHkRYvyQ
Top
Post Reply

Return to “User Stories / Projects / Courseware”