Lithophane light box

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
monttodd
Posts: 24
Joined: Mon 01 Oct , 2007 22:05 pm
Location: Harlem, Montana, USA
Contact:

Lithophane light box

Post by monttodd » Wed 02 Jan , 2008 19:12 pm

Here is a lightbox that one of my students made for a Christmas project. The cube is 100mm X 100mm X 100mm.
Attachments
lightcube1.JPG
lightcube1.JPG (73.8 KiB) Viewed 24858 times
lightcube2.jpg
lightcube2.jpg (70.37 KiB) Viewed 24858 times

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Thu 03 Jan , 2008 16:09 pm

Hi,

I cant veiw the photos but will get Admin to sort it for you.

Thanks for the Pewter casting photos we will get them up on the site as well!

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Fri 04 Jan , 2008 16:42 pm

Hi - have got the photos uploaded again for you.

I spotted what looks like a raisin - were you cooking christmas cakes that day ? :wink:

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Fri 02 May , 2008 8:44 am

Have just had a couple of pictures sent in from Ca

More light boxes.
Attachments
lamp.JPG
lamp.JPG (19.61 KiB) Viewed 24367 times

gamebuster
Posts: 5
Joined: Mon 12 Oct , 2009 9:36 am
Location: Nottingham

Re: Lithophane light box

Post by gamebuster » Mon 02 Dec , 2013 16:13 pm

I thought i would sit down and have a go at one of these, here is my first attempt.
Attachments
20131202_133541 (Medium).jpg
20131202_133541 (Medium).jpg (99.27 KiB) Viewed 21179 times
20131202_133533 (Medium).jpg
20131202_133533 (Medium).jpg (98.25 KiB) Viewed 21179 times
20131202_133525 (Medium).jpg
20131202_133525 (Medium).jpg (104.47 KiB) Viewed 21179 times
20131202_133516 (Medium).jpg
20131202_133516 (Medium).jpg (122.76 KiB) Viewed 21179 times
20131202_133449 (Medium).jpg
20131202_133449 (Medium).jpg (126.89 KiB) Viewed 21179 times
20131202_133443 (Medium).jpg
20131202_133443 (Medium).jpg (131.69 KiB) Viewed 21179 times

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Lithophane light box

Post by Steve » Mon 02 Dec , 2013 16:26 pm

These are really nice! What are you using as the light??

gamebuster
Posts: 5
Joined: Mon 12 Oct , 2009 9:36 am
Location: Nottingham

Re: Lithophane light box

Post by gamebuster » Mon 02 Dec , 2013 18:20 pm

Steve wrote:These are really nice! What are you using as the light??
Just an old ceiling bayonet light socket and a bog standard 40w light bulb. (nothing fancy or energy saving) :lolol:

Post Reply