Make stuff for your dolls house ;-) with QuickCAM 2D

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Make stuff for your dolls house ;-) with QuickCAM 2D

Post by Denford Admin » Tue 28 Mar , 2006 14:34 pm

Some dolls house furniture Pete made for his daughters with QuickCAM 2D Design, Denford Microrouter and some 3mm acrylic:
Image
Image

Get the QuickCAM 2D design file here:
http://www.denfordata.com/projectimages ... _table.MCM
Top
Post Reply

Return to “User Stories / Projects / Courseware”