The Coke Bottle

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
ChrisZ
Posts: 5
Joined: Thu 11 Oct , 2007 11:03 am
Location: Billingham

The Coke Bottle

Post by ChrisZ » Thu 11 Oct , 2007 11:18 am

Hello forum

During the commisioning of my 2600 pro, i was shown a coke bottle being made from a rolling pin. I was hoping i might be able to acquire the program to create it.
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1451
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Thu 11 Oct , 2007 11:41 am

I will ask the sales guys if they can pass on the STL file or the CNC file.
Top
Peter
Posts: 8
Joined: Thu 09 Mar , 2006 7:46 am
Location: Brighouse, UK

Coke Bottle

Post by Peter » Fri 12 Oct , 2007 12:30 pm

The Rolling Pin was from IKEA - 63mm diameter 250mm long
Attachments
Cokebottle_roughing.fnc
This is the CNC program for the roughing using a 1/4" ball nose cutter
(72.98 KiB) Downloaded 1207 times
Cokebottle_finishing.fnc
This is the CNC program for the finishing using a 1/4" ball nose cutter
(629.73 KiB) Downloaded 1178 times
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: The Coke Bottle

Post by Martin » Wed 12 May , 2010 14:53 pm

Stl file
Attachments
CokeBottle.zip
(710.16 KiB) Downloaded 866 times
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: The Coke Bottle

Post by Denford Admin » Wed 12 May , 2010 16:45 pm

better late than never :wink:
Top
Post Reply

Return to “User Stories / Projects / Courseware”