Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Fri 03 Jul , 2009 14:06 pm
Inspired by Paul Bray's Waltzing Matilda Denford machine:
https://www.youtube.com/watch?v=Uhe0pewoA04
I've written a rough and ready program that will read in MIDI files and create G-code to play the tune on a stepper machine (in my spare time of course
)
Here are a couple of g-code tunes I guess anyone could try out (they're in absolute values and only move the X axis back and forth)
(The Wild Rover is my favourite)
Enjoy
-
Attachments
-
- AmazingGrace.FNC
- (4.27 KiB) Downloaded 1292 times
-
- suzanna.FNC
- (2.94 KiB) Downloaded 1316 times
-
- Brittania.FNC
- (4.98 KiB) Downloaded 1261 times
-
- WildRover.FNC
- (6.61 KiB) Downloaded 1302 times
-
Martin
- CNC Guru
- Posts: 1916
- Joined: Fri 24 Feb , 2006 17:09 pm
- Location: Brighouse
Post
by Martin » Mon 15 Apr , 2013 14:17 pm
Can you convert Gangnam Style Admin?
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Mon 15 Apr , 2013 14:42 pm
Of course
Looks like you'll need a lot of X travel: from X+133.577 to X-635.230
It'll fit on a Router 6600
The shorter version will move from X+133.577 to X-285.991 which will fit onto a Router 2600
Let me know how it sounds!
-
Martin
- CNC Guru
- Posts: 1916
- Joined: Fri 24 Feb , 2006 17:09 pm
- Location: Brighouse
Post
by Martin » Mon 15 Apr , 2013 15:38 pm
It's not the best.
Thanks anyway.
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Mon 15 Apr , 2013 15:43 pm
Garbage In - Garbage Out
