Denford Cyclone

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
moray
CNC Apprentice
CNC Apprentice
Posts: 97
Joined: Thu 12 Sep , 2013 20:02 pm
Hardware/Software: Triac VMC

Denford Cyclone

Post by moray » Mon 14 Jun , 2021 18:33 pm

I'm needing workshop space, so I'm selling my Cyclone.

It's one with a larger 160mm chuck and corresponding 6 position turret.
Originally it was a stepper driven PC controlled lathe, but I converted it with two Kinco servos (750W on the Z, and 400W on the X), and a Dynomotion KFlop/Kanalog combination.

It currently requires both 240V single phase (for the servos, and control electrics), and 415V three phase (for the spindle, turret and coolant pump).

Looking for £3000 as it stands.

b757bob
Posts: 1
Joined: Sun 26 Jan , 2020 17:42 pm

Re: Denford Cyclone

Post by b757bob » Wed 16 Jun , 2021 22:23 pm

I'm interested and Ive sent a message. Whats your location please.
Bob

Post Reply