Denford TRIAC ATC .... Needs a home

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
wez50
Posts: 4
Joined: Thu 26 Jul , 2007 12:57 pm
Location: High Peak, Derbyshire

Denford TRIAC ATC .... Needs a home

Post by wez50 » Thu 26 Jul , 2007 13:08 pm

Denford TRIAC ATC .... Needs a home

This machine was purchased with the prospect of getting a young family member into the Engineering scene.

The control was taken off with the outlook of using flashcut or mach3.

To get this working you will need stepper motor drivers, and a control system + alittle time to wire it up.
Mach3 should even drive the tool changer ! … some spindle tooling also.

SENSIBLE offers considered!

The machine is located north Derbyshire

cleefurd
Posts: 5
Joined: Thu 27 Apr , 2006 20:17 pm
Contact:

Triac w/ ATC

Post by cleefurd » Mon 13 Aug , 2007 21:38 pm

I have a 1985 Triac that could use a twin for upgrade parts/modernization. What spindle does yours have? I would love to find out more about the one you are offering. Perhaps I could purchase it and sell mine, since yours sounds more modern. I do not mind that the controls are missing, since I was planning to update either way. Does it still have the spindle motor and driver? Hope to hear from you soon. Thank you in advance for any response you may provide.

joey1117
Posts: 13
Joined: Sat 18 Aug , 2007 21:09 pm

Post by joey1117 » Sun 19 Aug , 2007 21:33 pm

i need a motherboard for mine

cleefurd
Posts: 5
Joined: Thu 27 Apr , 2006 20:17 pm
Contact:

Post by cleefurd » Sat 08 Dec , 2007 19:53 pm

Not sure if you remember me. Have you sold these items yet? Thanks in advance for any response you may provide.

Post Reply