Viceroy tds top slide

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Steve, Mr Magoo, Martin, bradders

Post Reply
Tally47
Posts: 1
Joined: Thu 06 Jan , 2022 14:27 pm

Viceroy tds top slide

Post by Tally47 » Thu 06 Jan , 2022 14:36 pm

Hi folks, the top slide casting has broken on my Viceroy tds lathe where the tool holder fits.
Does anyone have one for sale? Or any experience in making a new one?
Is it possible to fit something from a different machine?
Thanks

Pete.
CNC Expert
CNC Expert
Posts: 281
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: Viceroy tds top slide

Post by Pete. » Sat 08 Jan , 2022 16:57 pm

If it's the upturned taper cone that's broken away you could effect a temporary repair by drilling through and bolting from below with countersunk screws, unless it's torn a hole. My first lathe was an atlas that has been crashed and repaired in this fashion. It was still like it when I sold it on.

Minijamie32
Posts: 1
Joined: Mon 22 Aug , 2022 19:50 pm

Re: Viceroy tds top slide

Post by Minijamie32 » Mon 22 Aug , 2022 20:38 pm

Hi I'm missing the cog that connects the wheel handle to move the slide left to right can anyone help with size, number of teeth ect. Picture and / or sizes so I could get one made. See pictures attached. Hope this makes sence.
Thanks Jamie
Attachments
20220822_194753.jpg
20220822_194753.jpg (410.49 KiB) Viewed 285 times
20220822_194743.jpg
20220822_194743.jpg (280.23 KiB) Viewed 285 times

Post Reply