as in the title i need one of the eight grippers and it's holder for a triac atc. That's the flexible gripper and the half round mount that makes up the tool holder in the carousel.
Bit of a long shot but you never know.
Triac atc carousel tool clamp gripper wanted
Moderators: Martin, Steve, Mr Magoo
-
angel-tech
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: Triac atc carousel tool clamp gripper wanted
MCV2/711 Tool Holder Roller - 2 required per tool holder - £18.00 each
TR3/728A Tool Holder Spring - 1 required per tool holder - £8.00 each
These prices are ex P&P and VAT
TR3/728A Tool Holder Spring - 1 required per tool holder - £8.00 each
These prices are ex P&P and VAT
-
angel-tech
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Triac atc carousel tool clamp gripper wanted
and i need the ally block that holds the tool holder spring in place.
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Triac atc carousel tool clamp gripper wanted
Have added some detailed drawings of the triac tool carousel
viewtopic.php?f=47&t=3812
viewtopic.php?f=47&t=3812
-
jamesgates1000
- CNC Apprentice
- Posts: 89
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Re: Triac atc carousel tool clamp gripper wanted
Are there any of the springs still available?
Re: Triac atc carousel tool clamp gripper wanted
The spring is still used on the current VMC1300 Toolchanger as a VMC/0721 The price is now £11.50 plus Vat
The old spring had to be drilled the new one is punched for the locating screw.
The old spring had to be drilled the new one is punched for the locating screw.