CASTROL SPHEEROL AP 3
Moderators: Martin, Steve, Mr Magoo
-
jamesgates1000
- CNC Apprentice
- Posts: 89
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
CASTROL SPHEEROL AP 3
Was looking for some Bearing grease a while ago for the axis bearings on my Denford Triac, the service manual suggested BP LS 3. I found out that this has been discontinued and the replacement suggested was CASTROL SPHEEROL AP 3. I bought a case as it was a better deal andf now have a load surplus, so if anyone wants any I can provide you with a 400g cartridge for £8 Delivered.