Hi, my MIRAC has a 6 tool changer, but is missing a couple of the wedges for clamping the tools and I've only one internal tool holder block. If anyone one has some spares I'll buy them. It will save the trouble of making more.
please Message me.
Wanted MIRAC tooling
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 27
- Joined: Fri 04 Oct , 2013 21:14 pm
- Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC
Wanted MIRAC tooling
- Attachments
-
- image.jpg (274.63 KiB) Viewed 5697 times
-
- Posts: 27
- Joined: Fri 04 Oct , 2013 21:14 pm
- Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC
Re: Wanted MIRAC tooling
If no one has any spares, does anyone have a drawing I could have a copy of?
Re: Wanted MIRAC tooling
Try looking at this post.
The turret is made in italy and is a Barufaldi 6 station Turret.
You may be able to get parts from the agent
viewtopic.php?f=40&t=2224&p=7842&hilit= ... rret#p7842
The turret is made in italy and is a Barufaldi 6 station Turret.
You may be able to get parts from the agent
viewtopic.php?f=40&t=2224&p=7842&hilit= ... rret#p7842
-
- Posts: 27
- Joined: Fri 04 Oct , 2013 21:14 pm
- Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC
Re: Wanted MIRAC tooling
Hi All,
I contacted the agent above, it sounds like they might be able to help with the turret, but the tool holding was a Denford design, so I'll try Denford instead.
I contacted the agent above, it sounds like they might be able to help with the turret, but the tool holding was a Denford design, so I'll try Denford instead.
-
- Posts: 27
- Joined: Fri 04 Oct , 2013 21:14 pm
- Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC
Re: Wanted MIRAC tooling
Denford replied and can't help any more.