Orac for sale + spares

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
jazzman
Posts: 27
Joined: Sat 25 Nov , 2006 15:04 pm
Location: Chichester

Orac for sale + spares

Post by jazzman » Sat 25 Nov , 2006 17:01 pm

I have an Orac lathe, 1985, in nice condition, which I have prepared to convert to Mach 3. I have carefully removed the "insides", but as I am now using a Harrison 250cnc, (also on mach 3, fantastic), I would be willing to sell the Orac as a kit.
1 Orac Lathe
2 cd20 drive cage shortened, and computer boards removed
3 Drive power supply (needs fuses)
4 24v stabilized supply for logic and E-STOP
5 Parajust Spindle unit
6 CNC4PC Isolated I/O board +charge pump safety board +5v&12v
regulated supply

You will need a PC for Mach3, a chuck, a toolpost, and the ability to wire this lot up !


This leaves the monitor chassis, cassette mech. and computer boards for sale!

I also have an Easiturn PNC3 Case, including monitor, keyboard,cassette,and computer pcb's(but excluding drives and power supply) should anyone need it.
Top
Daveslaithe
Posts: 6
Joined: Fri 20 Oct , 2006 13:10 pm
Location: Chiseldon Wiltshire

Post by Daveslaithe » Sun 26 Nov , 2006 20:31 pm

Hi jazzman, I am interested in buying the Orac monitor. How much do you want for it? Regards Dave
Top
Daveslaithe
Posts: 6
Joined: Fri 20 Oct , 2006 13:10 pm
Location: Chiseldon Wiltshire

Post by Daveslaithe » Sun 26 Nov , 2006 20:35 pm

:oops: Whoops I think I missread your ad, it says Monitor chassis............thought it was the Orac monitor complete. Let me know if I am correct Jazzman please. Dave
Top
jazzman
Posts: 27
Joined: Sat 25 Nov , 2006 15:04 pm
Location: Chichester

Post by jazzman » Mon 27 Nov , 2006 0:08 am

Hi dave,
It is the complete monitor.
mike
Top
Daveslaithe
Posts: 6
Joined: Fri 20 Oct , 2006 13:10 pm
Location: Chiseldon Wiltshire

Post by Daveslaithe » Mon 27 Nov , 2006 14:05 pm

:lol: Hi Mike, thats great............how much would you like for it?
Dave
Top
jazzman
Posts: 27
Joined: Sat 25 Nov , 2006 15:04 pm
Location: Chichester

Post by jazzman » Mon 27 Nov , 2006 20:18 pm

Hi Dave,

If you can collect from West Sussex, then I'd ask£39. Don't really want to post it, too fragile. BTW, I've tried to Email you from the forum links, but I don't seem to have the hang of it !
Best Wishes Mike.
Top
the_mechanic
Posts: 9
Joined: Sat 11 Nov , 2006 13:27 pm

Post by the_mechanic » Mon 27 Nov , 2006 21:54 pm

Hi JazzMan,

Are the CD20 drive cards for sale as well?
If yes I am interested in buying them. Are they available? Can you kindly indicate the price please?

Regards
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Tue 28 Nov , 2006 10:27 am

well I asked days ago how much was the orac by PM but I guess you've not found PM's yet

so how much?
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
the_mechanic
Posts: 9
Joined: Sat 11 Nov , 2006 13:27 pm

Post by the_mechanic » Wed 29 Nov , 2006 20:04 pm

Dear Triac whizz

Can you kindly elaborate further please if you are replying to my thread? What do you mean by PM?

Regards
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Wed 29 Nov , 2006 21:10 pm

I see you found PM's look again another mail awaits :)
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Wed 29 Nov , 2006 21:18 pm

look at top of page Private messages =PM's :)
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
Post Reply

Return to “Denford Classifieds”