Denford nova router

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
A.PENNOCK
Posts: 13
Joined: Wed 14 Feb , 2007 19:25 pm

Denford nova router

Post by A.PENNOCK » Wed 02 Mar , 2011 22:01 pm

Has anyone out there got an instruction manual for a nova router or software please does it run with windows? thanks
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Denford nova router

Post by Denford Admin » Thu 03 Mar , 2011 9:27 am

AFAIK the Nova Router was a prototype of the MicroRouter:
viewtopic.php?f=37&t=2567
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Denford nova router

Post by Martin » Fri 04 Mar , 2011 0:23 am

From what I remember the Nova Router was a prototype that used the Magnum router control.

I presume the software will be Dos based only.
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Denford nova router

Post by Martin » Fri 04 Mar , 2011 9:38 am

If it does have the Phoenix Magnum control you can download the software from the Denford website.


https://website.denford.ltd.uk/support/9 ... s-software

Phoenix Magnum Router Dos Software (1.2Mb Zip)
Top
Post Reply

Return to “Denford Classifieds”