PNC3 Maintanance manual reqd.

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
brodley
Posts: 11
Joined: Tue 26 May , 2009 15:20 pm

PNC3 Maintanance manual reqd.

Post by brodley » Tue 11 May , 2010 14:14 pm

Could someone help with a PNC3 maintanance manual as we are having problems with a datum switch but in the test mode we are not clear as to what is what, but we believe all is explained in the PNC3 maintanance manual, Thank you.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: PNC3 Maintanance manual reqd.

Post by Denford Admin » Tue 11 May , 2010 15:05 pm

All I could find was a Triac programming and maintenance manual for the PNC3:
viewtopic.php?f=15&t=2880
Top
Post Reply

Return to “Denford Classifieds”