ExtraTurn retrofit package

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

ExtraTurn retrofit package

Post by Denford Admin » Wed 21 Jul , 2010 10:45 am

This was a new discovery in the archives
ExtraTurn-4-and-6-brochure_Page_1.jpg
Where's the Chuck then??
ExtraTurn-4-and-6-brochure_Page_1.jpg (71.25 KiB) Viewed 8536 times
ExtraTurn-4-and-6-brochure_Page_2.jpg
Ian Vickery ?
ExtraTurn-4-and-6-brochure_Page_2.jpg (92.07 KiB) Viewed 8536 times
ExtraTurn-brochure_Page_1.jpg
Ahh, that's how it works
ExtraTurn-brochure_Page_1.jpg (98.9 KiB) Viewed 8536 times
ExtraTurn-brochure_Page_2.jpg
ExtraTurn-brochure_Page_2.jpg (99.55 KiB) Viewed 8536 times

Post Reply