If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
-
Contact:
Post
by bradders » Thu 23 Apr , 2009 9:02 am
Andrew Denford
-
Attachments
-
- Andrew Denford.JPG (46.68 KiB) Viewed 23267 times
-
Martin
- CNC Guru
- Posts: 1916
- Joined: Fri 24 Feb , 2006 17:09 pm
- Location: Brighouse
Post
by Martin » Thu 23 Apr , 2009 9:52 am
Wonder if he still has the smock?
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
-
Contact:
Post
by bradders » Thu 23 Apr , 2009 10:55 am
-
Mr Magoo
- CNC Guru
- Posts: 301
- Joined: Tue 21 Feb , 2006 21:45 pm
- Location: Brisbane, Australia
Post
by Mr Magoo » Thu 10 Sep , 2009 23:14 pm
Isn't that a young Harry Hill ???
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Fri 11 Sep , 2009 8:58 am
How about this one of Andrew from (we think) 1984
-
Attachments
-
- amd-1984-only.jpg (26.1 KiB) Viewed 22960 times
