Made this yesterday for the 4x4 in schools team.
Creating design just from the jpg logo was easy
Get the MCM file here to play with it yourself:
http://www.denfordata.com/projectimages/4x4.MCM
For more on the 4x4 in schools challenge, see here:
http://www.4x4inschools.com
QuickCAM makes a 4x4 challenge spray stencil
Moderators: Martin, Steve, Mr Magoo
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: