LaserCAM 2D v1.5 released 16th Feb 2007

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

LaserCAM 2D v1.5 released 16th Feb 2007

Post by Denford Admin » Fri 16 Feb , 2007 15:28 pm

Get the new version from our downloads page:

http://www.website.denford.ltd.uk/suppo ... -downloads
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Fri 16 Feb , 2007 15:29 pm

This fixes an initial crashing problem on some customers PC's
Top
Post Reply

Return to “QuickCAM / LaserCAM 2D Design”