I am having problems problems installing LaserCAM 2D, i have downloaded version 1.4 from the Denford web site and tried in on 4 of my colleagues PC's with the same result. See the attacled link
https://www.shelleycollege.org/james/denford.htm
Problems installing LaserCAM 2D
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
The software looks like it is failing to load up something at the start - could be an activex control, or maybe the OpenGL graphics drivers.
Try:
Reduce hardware acceleration to none.
Install and run as the same Administrator
When you say you have tried on various other PC's - are they all the same type ? and connected to a secured network ?
Can you try it at home, ie, on a regular XP PC ?
We have never had a problem running the software here or at other schools, so it must be something to do with access permissions, or the hardware / drivers on the PC's
Try:
Reduce hardware acceleration to none.
Install and run as the same Administrator
When you say you have tried on various other PC's - are they all the same type ? and connected to a secured network ?
Can you try it at home, ie, on a regular XP PC ?
We have never had a problem running the software here or at other schools, so it must be something to do with access permissions, or the hardware / drivers on the PC's