Datum Points

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Tony Kelly
Posts: 19
Joined: Fri 14 Jun , 2019 17:08 pm
Hardware/Software: Denford Novamill
Milling VR5
Fusion 360
Location: Heathrow

Datum Points

Post by Tony Kelly » Fri 09 Aug , 2019 21:24 pm

Hi all

Can anyone tell me how to set the correct datum points on the novamill, QuickCam 2D Design/VR Milling V5?

Machine keeps coming up with the error exceeds machine limits, any help would be appreciated.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Datum Points

Post by Martin » Mon 12 Aug , 2019 9:22 am

Have a look at the Tutorials.

In VRMilling go to Help then Tutorials. Cut part single tool should guide you through.

User avatar
Tony Kelly
Posts: 19
Joined: Fri 14 Jun , 2019 17:08 pm
Hardware/Software: Denford Novamill
Milling VR5
Fusion 360
Location: Heathrow

Re: Datum Points

Post by Tony Kelly » Mon 12 Aug , 2019 11:48 am

Hi Martin

Thanks for that i will give it a go.

Post Reply