LaserCAM and QuickCAM 2D v1.12 released 11th Oct 2010

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

LaserCAM and QuickCAM 2D v1.12 released 11th Oct 2010

Post by Denford Admin » Mon 11 Oct , 2010 10:03 am

// 1.12 - Tooling data is re-read when starting the CAM wizard and when editing - incase tools have changed in VR Milling
// 1.12 - Material data is re-read when starting the CAM wizard and when editing - incase materials have changed in VR Milling
// 1.12 - When posting out, the TOOLDIAM (used in TOOLDEF) is now output correctly. This helps when the plan description isn't updated to reflect a new tool diameter being set (TOOLDEF Dxxx is the actual value that's been used by QC)
// 1.12 - Made some fixes when using it in Imperial / inch mode
// 1.12 - Added arc drawing by start, centre, end
// 1.12 - Fixed so that rectangles can be chamfered or filleted

As usual - check here for the latest version:
http://www.denford.co.uk/index.php?opti ... 5&Itemid=5

Post Reply