Announcement is a bit late, but v1.7 has these updates:
Added Brightness/Contrast/Greyscale/Invert/Halftone(lots of variants) into a new image editing screen within the image import thumbnail bit.
Fixed cursor display not showing inch values when units are set to inch
Improved image contouring - its faster and makes smoother lines
added a message to warn if printer page size could not be read (Versalaser drivers often return 0 width & height until you have gone to properties and selected a material in the VLS/PLS driver)
check for latest version here:
https://www.website.denford.ltd.uk/suppo ... -downloads
LaserCAM and QuickCAM 2D v1.7 released 5th July 2007
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: