QuickCam 2d cursor coordinates

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

QuickCam 2d cursor coordinates

Post by boots » Mon 02 Jul , 2007 18:07 pm

Using QuickCam 2d v1.6 the cursor XY coordinates in the lower left of the screen are always in metric. Is there anyway to change it to inch? I've change the units to inch, the billet size and the"specify" XY go to inch but the XY Cursor coordinates in the lower left stay in metric.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 03 Jul , 2007 8:51 am

Unfortunately thats a bug that has appeared since changing the way it read material and machine parameters :oops:

Will be fixed in v1.7 :)
Top
Post Reply

Return to “QuickCAM / LaserCAM 2D Design”