Search found 1897 matches

by Martin
Fri 27 May , 2022 12:15 pm
Forum: Cyclone
Topic: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen
Replies: 10
Views: 7801

Re: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen

Without any info on the screen I would still be looking at asking a Fanuc Engineer for guidance.
by Martin
Fri 13 May , 2022 12:18 pm
Forum: Triac
Topic: Triac Spindle (Issues)
Replies: 17
Views: 18925

Re: Triac Spindle (Issues)

You need to unscrew the caps
by Martin
Fri 13 May , 2022 11:46 am
Forum: Router 2600
Topic: Y axis homing the wrong way!
Replies: 1
Views: 3755

Re: Y axis homing the wrong way!

You may have some dust in the Y Axis home switch.

If you manually push the switch a few times while holding a vac next to it should be fine.
by Martin
Fri 29 Apr , 2022 11:05 am
Forum: Triac
Topic: Triac autolube wiring
Replies: 2
Views: 4247

Re: Triac autolube wiring

What control does your Triac have?
by Martin
Tue 12 Apr , 2022 12:47 pm
Forum: Cyclone
Topic: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen
Replies: 10
Views: 7801

Re: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen

Does the screen come on?

It may be worth speaking to Fanuc directly.
by Martin
Mon 11 Apr , 2022 8:52 am
Forum: Novamill
Topic: NovaMill NaxtMove diagram
Replies: 1
Views: 4495

Re: NovaMill NaxtMove diagram

Novamill DenStep/NextStep drawings
by Martin
Mon 11 Apr , 2022 8:47 am
Forum: Cyclone
Topic: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen
Replies: 10
Views: 7801

Re: Tu150P Fanuc O-T, doesn't bootup - no data on the screen

Can you post some pictures.

Is it a Fanuc Control?
by Martin
Mon 28 Mar , 2022 9:12 am
Forum: NovaTurn
Topic: denford novaturn
Replies: 10
Views: 8296

Re: denford novaturn

I think you may have the wrong firmware on the control card. It should be 5403 & not 5414. If you open up & connect to the machine using EasyUpgrader then double left mouse click on the orange banner near the top you can select the firmware. You should have NextMove ST USB Rohs with CE updates 2009 ...
by Martin
Mon 28 Mar , 2022 8:56 am
Forum: Software
Topic: VR Milling v2.32 not working with seckey.tff
Replies: 2
Views: 5050

Re: VR Milling v2.32 not working with seckey.tff

I think the Seckey.tff license is for VR Milling version 5.

You can download it from the Denford website.
by Martin
Tue 22 Mar , 2022 8:30 am
Forum: NovaTurn
Topic: denford novaturn
Replies: 10
Views: 8296

Re: denford novaturn

Hi Josh

If its a NextStep you don`t need the eprom.

If you run EasyUpgrader & try to connect.

I presume you have installed the USB Drivers?
by Martin
Mon 14 Mar , 2022 12:03 pm
Forum: NovaTurn
Topic: denford novaturn
Replies: 10
Views: 8296

Re: denford novaturn

It sounds like VR Turning is not seeing the machine.

Is the machine switched on?
Is the seven segment led on the control card illuminated?
What control board does your machine have?
What is the connection between the computer & machine?
by Martin
Tue 08 Mar , 2022 8:58 am
Forum: Electronics
Topic: 4th axis rotation
Replies: 1
Views: 4557

Re: 4th axis rotation

To change direction of the stepper motor you need to invert one of the phases to the motor. It`s normally easier to change them on the stepper drive in the electrical cabinet.
by Martin
Fri 04 Mar , 2022 11:45 am
Forum: Turn270
Topic: Dead Motor Driver?!?
Replies: 4
Views: 5254

Re: Dead Motor Driver?!?

Yes it looks to be the same. P-01 Max Speed 86 P-02 Min Speed 0 P-03 Acceleration 4 P-04 Deceleration 4 P-05 Ramp to Stop 0 P-06 Energy Optimiser 1 P-07 Motor Rated Voltage 240 P-08 Max Current 7 P-09 Rated Hz 50 P-10 Motor Rated Speed 0 P-11 BOOST 4 P-12 Primary Command Source 0 P-13 Default Defi.t...
by Martin
Thu 03 Mar , 2022 17:37 pm
Forum: Turn270
Topic: Dead Motor Driver?!?
Replies: 4
Views: 5254

Re: Dead Motor Driver?!?

it sounds like you have done all the checks can.

We now fit a OPTIDRIVE E3 1.5Kw drive to the Turn270's.

It is made by Invertek Drives.com

If you need the drive parameters let us know.
by Martin
Thu 03 Mar , 2022 17:31 pm
Forum: VersaLaser
Topic: How to replace mirrors 2 and 3 on versalaser
Replies: 8
Views: 18159

Re: How to replace mirrors 2 and 3 on versalaser

We can supply spares for the ULS Lasers.

Denford Ltd, 01484 728000

Do you know what model you have & which optics you require?
by Martin
Mon 21 Feb , 2022 12:17 pm
Forum: Software
Topic: Relief carving Z-zero point
Replies: 1
Views: 4685

Re: Relief carving Z-zero point

You will need to set the Z offset for each additional tool when setting up. You can set the Z for each tool in the Tooling Data tab. If you change to tool 2 & insert the tool you can touch on the top of work & set the offset for each additional tool. The only issue then is the tools need to be in fi...
by Martin
Thu 17 Feb , 2022 10:11 am
Forum: Novamill
Topic: Novamill control board (can’t connect)
Replies: 2
Views: 4370

Re: Novamill control board (can’t connect)

Hope this helps
by Martin
Wed 09 Feb , 2022 14:04 pm
Forum: Electronics
Topic: 4th Axis plug replacement
Replies: 2
Views: 4801

Re: 4th Axis plug replacement

We get them from RS Components

RS Stock No.: 467-239
RS Stock No.: 467-194
RS Stock No.: 468-541
RS Stock No.: 468-557
by Martin
Thu 03 Feb , 2022 12:41 pm
Forum: Router 2600
Topic: Random toolpath deviation!
Replies: 4
Views: 5187

Re: Random toolpath deviation!

The slides may just need lubricating with silicone spray.
by Martin
Mon 17 Jan , 2022 9:33 am
Forum: MicroRouter
Topic: Miro Router ignoring offsets
Replies: 1
Views: 4414

Re: Miro Router ignoring offsets

Have you been through any of the Tutorials in the VR Milling software.

Cut part single tool?

Also make sure you have read/write access on the computer.