Search found 15 matches

Yep your dead on. I did not know enough but after messing around enough I got it to work and then it all clicked in my head.

Thanks all.

I finally got it after messing with if for the longest time. It was my offsets. The Max Z axis was 80 however I found its actually a little less than that. So as you mentioned by adjusting the body of the router in the holder I can fix that. I am starting to understand this Thanks to you.

I really ...

Thanks for the tip but I just cant get it to work. I understand the problem and see it but cant fix it.


The output of the post processor on 2D design tells the router to move the Z axis to 2, but obviously it can not. The machine code and program code was 0 on all axis so 2 was not possible to ...

Hello,

I am looking for a complete software package to get our old router working.

Here's what we have:

MicroRouter V4NS with software version 2.14a

Then we have:
VR 2.30.3.947
2d Design 1.21
Quick Cam vr2.0.0.33


I am ready to buy it all just need help getting what I need and a source to ...

I think i got it now. I just need to tweak my settings in 2d so it matches up with the router, and using all metric seems to work better.

Thanks fo rall you do. You are always right on top of things. The company should pay you double.

My VRCM Version is = 2.30.3.947
I have a Microrouter


After setting my offsets and joging to the cordinates everything seems OK

but I still get the error.

I then put my offsets closer to the center and it worked, so what do I change or reconfigure so my actual physical working envelope is not ...

When I said my cordinates were negative I was talking about the Machine cordinates from home location. Home is all zeros in machine cordinates. The program cordinates change at the home location depending on the ofset values.

When I look at the program code I am verifying that the values are all ...

I have since looked at the above information and everything is fine.

I think I have found the probelm but I dont know how to make the changes.

I am using techsoft 2D to export the code for simple text. When I look at XYZ values that are all positive and my machine moves with all negative ...

Thanks guys Ill check it out. I have an old version of VR its 3. something

Is there new updated post processor with out the bug?

I get this same error with my Router. If I change the file to the specifications above will I then be limiting the travel of my router??? Will I still have full use of the table?

That worked. Thanks !!!

Thanks for your help. I will try it. I have a new NS type and the 8 segment display inside is green so I will reinstall the software and try routers instead of router.

Your Awesome. You helped me out a lot. Thank You very much!!!

Yes I have used the updater the problem is It does not work because it says that the bootloader cards are out of date.

Denford gave us new software and did not realize until it was too late that they gave us software that does not work with our router. In the process they took our older copy of ...

About a year ago I installed more current VR CNC software that was given to me by one of the Denford reps. The current software version is 2.30.3.947.

My problem is it wont connect. I am still uning the back OEM rs232 cable that has a db 25 on one end and a DB 9 on the other.

Its connected to ...