Hi
I am a professor in a high school, we have an old STARTURN and a STARMILL.
In my school we are interested to buy more denford equipment,

Do you know how much a novaturn lathe costs?
how much a vmc 1300 aprox?

HI I have a problem, when I try to make thread and error appears and the screen displays "cannot thread", I entered the parameters that you suggest and the error continue. The Starturn parameters for the spindle are 100 to 1800 But I´ve noted the speed of the spindle is wrong, when I enter the spind...

HI I used a STARTURN, the software is fanucsld and I run it in dosbox, i made some proyects with it and work ok, but now I have this problem, when I try to made a thread the lathe marks the error "cannot thread", I´ve tried with a lot of ways changed my G codes and is the same problem. I don´t have ...

Hi, I tried to use DosBox to run the program, sometimes the software FANUCSMD can't connect with the machine and when the software connect with the machine in HOME mode it shows me an error message "CONTROLLER COMMUNICATION". Then i tried to use a virtual machine "Virtual PC 2007" with "MS-DOS 6.22"...

hi,

my starturn its working ok now
i had to download fanucsld and run it in a dos emulator
im using DosBox and it works perfect

thanks for all

hi, the PC RS232 port its ok because i'm using my starturn in the same port and its working ok i tried with dosbox and its the same problem. sometimes the display shows an L and the starmill can't connect to the PC How can i solve this problem? which are the correct values for baudrate parity databi...

hi, again

i had latheCAM software and i think its a very good CAM software, but i loose the disk of the software and i dont have a copy.

Do you still sell the LatheCAM software?
How can i get a copy of LatheCAM software?

Denford Admin

Can you send a LatheCAM free copy to me too?

Hi, I have a problem using a starmill. i don't know the version of my controller, but im using fanucsmd and i can't get into the program. I can edit the program with the desktop tutor but when I press the botton "home" it gets into the home screen and appears "error controller communication". and I ...

Hi guys,

I have a staturn, I use the software fanucsld, the lathe have a delay of very seconds to response to the orders of the desk top tutor, when I say very seconds are 10 to 30 seconds¡¡

It is normal or how can I change this situation?

Hi, I have problems with my starturn it have the reference E04071 made in 1992, I have the controller, the starturn and a desktop tutor but I do not have any programs, The only information I have is the controller uses the software fanucld v 1.0, I download fanucld and the sofware runs very well wit...