Did you ever solve this issue? I have the same problem and looking for some guidance. The z-axis makes a shutter noise and then the z-axis is off in the program which causes the bit to run into the F1 jig I am using. I have attached a picture showing burnt contacts in the Schrack SR6C4024 6 connecti...

Thanks Steve, I did lower the router mount one set of bolts and the file ran great.

I did zero the bit on top of the spiggot holding the car +6. The reading on the top of the block is +32.5 I ran an old car file I found and the machine worked just fine. For some reason the F1 test jig file doesn't touch down far enough. I'll look into how far down the router will reach and re-posit...

I am trying to rejuvenate a Compact 1000 that hasn't been used for ten years. I have followed the video to set the offsets for the f1 jig and have the model block in place. When I run the right side test program from Denford the tool doesn't reach down to the model block and at its lowest position i...