It does say Denford beta.

I will try the card again at the unit at the weekend and if it still gives the error then I will take you up on that kind offer!

Thanks

Just cleaned the board up with distilled water and its now drying. Once I've let it dry for 24 hours ill give a quick clean with rubbing alcohol too. Regarding the battery, if its redundant on the board can I simply remove it or should I replace it?

How do I find out which eprom? Is it on one of the boards somewhere? The leads are correct in as much I purchased a new cable lindy cable as linked to in this thread and I have the original lindy cable that came with the machine. Mintfinder cannot find the machine either. Thanks for all the help so ...

Thanks for all the replies. When hooked up with the cable that came with the machine VR milling cannot see the machine. I purchased a new Lindy cable https://www.lindy.co.uk//cables-adapters-c1/i-o-c125/2m-serial-adapter-cable-25-way-d-male-to-9-way-d-female-p528/s670 with no avail. I dug out an old...

Hi, I purchased a Denford Micromill 2000 from a school last year that powered up fine at the time. It has been in storage and I have finally got the time to get it up and running for low volume wooden and acrylic signage. The issue is it seems to have lost power. When I power the machine up the door...