All sorted now.
This thread had the answer.
viewtopic.php?f=54&t=2351&hilit=BI01812GG
Wiring diagram of cable attached.
Hopefully there is enough key words in this thread to help the next person.
Search found 15 matches
- Sat 03 Dec , 2022 15:37 pm
- Forum: MicroRouter
- Topic: Denford Mircrorouter V4 NS (2002) - RS232 cable Pinouts?
- Replies: 4
- Views: 5329
- Sat 03 Dec , 2022 14:47 pm
- Forum: MicroRouter
- Topic: Denford Mircrorouter V4 NS (2002) - RS232 cable Pinouts?
- Replies: 4
- Views: 5329
Re: Denford Mircrorouter V4 NS (2002) - RS232 cable Pinouts?
Here are the wires on the inside of the machine going into the RS232 plug. I'm even second guessing i have the Black wire and Shield in the correct place now as pin 1 goes to nowhere.
- Sat 03 Dec , 2022 10:51 am
- Forum: MicroRouter
- Topic: Denford Mircrorouter V4 NS (2002) - RS232 cable Pinouts?
- Replies: 4
- Views: 5329
Re: Denford Mircrorouter V4 NS (2002) - RS232 Pinouts?
I found this on the V4 wiring diagrams but mine starts on pin one (you can see the solder on the pin) and i don't have a green wire. (I'm going to guess the green wire has been substitute for a white wire??) Also number 7 is definitely the ground on the 25 pin connector, confusing the diagram is sho...
- Sat 03 Dec , 2022 10:41 am
- Forum: MicroRouter
- Topic: Denford Mircrorouter V4 NS (2002) - RS232 cable Pinouts?
- Replies: 4
- Views: 5329
Re: Denford Mircrorouter V4 NS - RS232 Pinouts?
So by looking at what tails were left on the plug I've put 2 wires back in their original places but now it's these 4 left, no chance of guessing which way they go. Does anyone have the correct pins outs?
Excuse the grubby fingers
Cheers
Excuse the grubby fingers
Cheers
- Fri 02 Dec , 2022 18:01 pm
- Forum: MicroRouter
- Topic: Denford Mircrorouter V4 NS (2002) - RS232 cable Pinouts?
- Replies: 4
- Views: 5329
Denford Mircrorouter V4 NS (2002) - RS232 cable Pinouts?
Was moving the machine today and unfortunately the 25 pin side of the RS232 cable got caught and pulled the cables out the pins, does anyone know the correct pin outs before i try and guess?
(Please attached photos for colours and pins)
Help appreciated
(Please attached photos for colours and pins)
Help appreciated
- Tue 08 Feb , 2022 9:34 am
- Forum: Denford Classifieds
- Topic: (SOLD) Deublin ltd pneumatic chuck for Mirac PC
- Replies: 12
- Views: 14479
Re: FOR SALE: Deublin ltd pneumatic chuck for Mirac PC
Private message sent
- Tue 18 Jan , 2022 10:14 am
- Forum: Mirac
- Topic: HELP - MIRAC DM08 turret truth table
- Replies: 1
- Views: 5460
HELP - MIRAC DM08 turret truth table
Hello
I am currently doing work on a recently purchased Mirac but my diode board is missing, does anyone have the truth table for the DM08 turret and does anyone know if the gray logic outputs are HIGH or LOW when active?
This would be a massive help to me.
Kind regards,
Tom
I am currently doing work on a recently purchased Mirac but my diode board is missing, does anyone have the truth table for the DM08 turret and does anyone know if the gray logic outputs are HIGH or LOW when active?
This would be a massive help to me.
Kind regards,
Tom
- Tue 14 Dec , 2021 23:30 pm
- Forum: Mirac
- Topic: Mirac - Encoder belt number
- Replies: 2
- Views: 5822
Re: Mirac - Encoder belt number
Hi John
Thank you for taking the time to reply, that has been very helpful.
Cheers,
Tom
Thank you for taking the time to reply, that has been very helpful.
Cheers,
Tom
- Thu 18 Nov , 2021 11:03 am
- Forum: Mirac
- Topic: Mirac - Encoder belt number
- Replies: 2
- Views: 5822
Mirac - Encoder belt number
Good morning
I am working my way through a recently acquired Mirac but the encoder belt is missing, does anyone have the part number on the belt or could they check for me.
Cheers
Tom
I am working my way through a recently acquired Mirac but the encoder belt is missing, does anyone have the part number on the belt or could they check for me.
Cheers
Tom
- Wed 10 Nov , 2021 16:27 pm
- Forum: Mirac
- Topic: Mirac - Stepper motors technical details required
- Replies: 0
- Views: 7457
Mirac - Stepper motors technical details required
Hello I am changing the electronics out on my Micra CNC lathe for my home shop, i have the machine stripped down but the steppers motors don't have any stickers on them with Spec or serials/names that i can use to search for these. I need the stepper motors technical details so i can buy the correct...
- Thu 15 Jun , 2017 10:37 am
- Forum: Micromill / Microturn
- Topic: Connection trouble shooting
- Replies: 9
- Views: 13561
Re: Connection trouble shooting
I belled the cable out and it had a fault, used another cable and we are up and running.
Thanks guys for taking the time to help, time to make some chips.
Thanks guys for taking the time to help, time to make some chips.
- Thu 15 Jun , 2017 10:27 am
- Forum: Micromill / Microturn
- Topic: Connection trouble shooting
- Replies: 9
- Views: 13561
Re: Connection trouble shooting
Now this is the odd bit, my MicroRouter set up works perfectly but when i change the Denford Machine cable to the Lindy cable linked above it cannot connect to the MicroRouter??
- Thu 15 Jun , 2017 9:50 am
- Forum: Micromill / Microturn
- Topic: Connection trouble shooting
- Replies: 9
- Views: 13561
Re: Connection trouble shooting
Cheers for the help guys.
Here is a picture of the inside of the 25pin connector.
Here is a picture of the inside of the 25pin connector.
- Wed 14 Jun , 2017 19:56 pm
- Forum: Micromill / Microturn
- Topic: Connection trouble shooting
- Replies: 9
- Views: 13561
Re: Connection trouble shooting
Hi Martin
Thank you for getting back to me, that would explain it then.
I do have one of these cables lying around: https://www.lindy.co.uk/cables-adapters ... -p528/s670
Could i swap the pins over and use this maybe?
Thank you for getting back to me, that would explain it then.
I do have one of these cables lying around: https://www.lindy.co.uk/cables-adapters ... -p528/s670
Could i swap the pins over and use this maybe?
- Wed 14 Jun , 2017 14:04 pm
- Forum: Micromill / Microturn
- Topic: Connection trouble shooting
- Replies: 9
- Views: 13561
Connection trouble shooting
Hello I have a Denford MicroRouter and love it so picked up a MicroMill 2000 when one came up and this is where my problem lies. The router works perfectly but the Micromill will not connect. It is the legacy Denstep board and i am running VR milling version 5. The cable is from my Router which work...