Search found 49 matches

This has now sold

For anyone interested i have now put this on ebay.
https://www.ebay.co.uk/itm/277235740868

Images attached

Hi,

I will post some photos up soon and we can see if its suitable for your needs. if not ill put it on Ebay

Hello Chris.

My apologies for not replying sooner! i didnt receive a notification from the forum on your reply!

Good news is the box is still available.
However i am unsure if it will solve the problem you have in a "plug and play" sense if im honest. This is something that would need to be ...

Apologies if thats what you meant anyway!

Hi Moray,

just a quick update,

In regards to the 24vdc inductive proximity switches required, in which you kindly provided a link for, i believe if im not mistaken that i could, instead of buying 3 of these (at £80+ each!) i could get away with only getting 1, just for the X home. as this is were ...

in regards to getting better bearings, i am now strongly considering this. must be a touch of madness in me seeing as i just probably ruined a pair of decent bearings!
as you mentioned kfm36, the 2MM208WIDUL fafnir bearings with ground preload spacer is tempting. ive seen pairs go for around £300 ...

Thank you for the replies

i managed to improve on this in the end. it required me removing the spindle from the head and reinstalling it. with the help of a heat gun, which i used the first time round but probably used it more effectively this time, and also a slight change in method.

instead of ...

Hello all,

I am in the process of upgrading my Triac spindle.

I have a 1.6kw 8000 rpm AC servo motor ordered for the spindle and for this i thought it was essential that i upgrade the spindle bearings.
So i went with bearings rated for 10000 rpm to give me a good headroom, link below.

https ...

Hi all,

I have an old unwanted Denford Triac PC PC Electronics/Control box. Is this something that would be of interest to anyone?
I have no use for it as i have gone for a new system and have bolted it to the back of my machine to make it a more practical all in one unit. If anyone is interested ...

holy mackerel!! thats pricey! i assume there are no other options for this as they are such an uncommon size? hence the ludicrous price. i have looked around online and had no luck finding anything like these. if there isnt any other option im not sure what to do now, i have already spent a pretty ...

okay ill have a good look through that. thank you very much

Hi Moray,

Thanks for your reply. i think ill do the same and replace the NAMUR system with new cables and 3 wire sensors or micro switches then. what sensors did you go with to home the axes? particularly the X axis as as the original proximity sensor for this is tiny! (may be the same for the ...

Hi all

I am in the process of upgrading my Triac PC to mach 3. I have bought a "CNC kit" (https://www.ebay.co.uk/itm/203718263502) and intend to pretty much start again with the electronics and have them in a new electronics enclosure bolted to the back of the machine, similar to what you would see ...

Hi all,

back once again for a possibly silly question, but hey you seem like a nice bunch so here goes!

I have a non ATC variant of the Triac and would like to ugrade my machine to have a pneumatic drawbar like the ATC variants have.
Im aware Denford supply the drawbar and other components ...

Hi Moray,

Thank you for your response, i had not heard of lubetec before, i looked on their website and they seem like the perfect supplier so thanks. the pump on my machine is a Bijur TM1 C2896, they sell a C2890 model, maybe i can make this work? hopefully just "plug and play".

the reason for ...

Hi all,

Im hoping you can help me. I need a replacement auto lube pump on my Triac. after a bit of googling to find a replacement i was shocked to find they go for silly money, cheapest i have found is around £500. is there an alternative i can use? such as a cheap chinese one?

Thank you

Hi, this is great work here well done! i am planning on doing the same. i am having a little trouble sourcing a suitable pneumatic cylinder. if you could tell me what one your using and were to get it i would be very grateful! thanks

i have the same issue, unfortunately the denford forum doesnt seem keen to help people with backlash issues. i have taken my table off the machine entirely to find that my ballscrew nuts are very worn which would explain the nearly 0.07mm backlash i was experiencing. will have to get new ones/get ...