after the CR it must be some character.Any character works but i have choosen STX... If it just needs any character then how about LF (Line Feed) it may be that easyDNC has the option of appending CR+LF at the end or just CR If you have choosen the PNC2-4 mode then it transmit only CR at the end wh...

I'd contact easyDNC - I'm sure they will have a way of adding the STX to the end of each line. ps, I'd also see if ETX works from hyperterminal...that makes more sense than using an STX at the end. after the CR it must be some character.Any character works but i have choosen STX... i will contact t...

so ok ! i have found the problem and the problem is easyDNC . If i transmit with hyperterm for example the line G01X170Z470FX1500 in this format : ctrl+B (this is the STX (02) character) G01X170Z470FX1500L ctrl+M (CR(0D)) ctrl+B (STX(02)) the cnc returns me a ACK(06) and i can type the next block an...

so ok ! i have found the problem and the problem is easyDNC . If i transmit with hyperterm for example the line G01X170Z470FX1500 in this format : ctrl+B (this is the STX (02) character) G01X170Z470FX1500L ctrl+M (CR(0D)) ctrl+B (STX(02)) the cnc returns me a ACK(06) and i can type the next block an...

I have tried several thinks and then i have found a topic here in the forums and downloaded a serial monitor to see the ASCII traffic to find the problem. I think that the problem is that the cnc dont transmit a ACK charakter (06 in ASCII ) when it recieves the first bock. so the easyDNC waits for t...

i am having pretty much the same problem like you. I have to reports some bugs maybe for the easyDNC 4.7 but first i want to explain my setup. 1)I have made a cable 9 pin pc and 7 pin cnc like shown here https://www.denfordata.com/bb/viewtopic.php?f=34&t=3899 2)i have a easiturn 3 version 3.57 - 25/...

No one can help ? please i am student and i want to make it work :/ ? If the usual members don't reply then it's because they can't help...it's better to leave a post unanswered as less frequent members (who may know the answer) can view unanswered posts. If we reply with a "sorry, we don't know" t...

I think there could be a couple of reasons for this. Either a) the PC is sending all of the CNC program but the control only recognises the first block. b) The PC sends the first block and is waiting for the control to request the next block. I am not familiar with EasyDNC but here are some suggest...

Hello i was wondering is someone have the motor from the oil pump . I think mine is not working :/

synchron 620 220v 60cy 3w 8rph

Martin wrote:It may be worth sending Mr Magoo a pm.

ok i will ! Thank you but if someone can help please do this !

No one can help ? please i am student and i want to make it work :/

edit:
and another question. Why does my easiturn dont have G00 and G27 ?

Hello i have a easiturn 3 with PNC 3 and i have make a cable like shown in the attached picture. I use a 9 pin Male on pc side and a ethernet cable (ethernet has 8 cables in it and i use the 3 of them) lenght of the cable 1.5meter. I am using a windows xp pc. The communication between the cnc and th...