Hi, sorry for the late reply. Thanks for the suggestions. We checked the SGR and that was seated fine. Also, we took the top off of the motor and the brushes looked fine and there was no carbon build up. We are a bit stumped as to what to do next. I guess we have to fault trace from the control box ...

Thanks for getting back to us so fast. It didn't seem to be the problem. We took the spindle's housing off and there is a big gap, about the thickness of a 5p, between the top of the spindle and the ATC actuator. We spun it up and the gap didn't close but the motor is still speeding up and down. Beh...

We are stuck on an issue that we hope one of you gurus may be able to help us with. We have a Denford Triac and when we set the spindle speed in the range of 500-1000 RPM, it will run smoothly then speed up and slow down. You can hear the tone of the machine changing and the speed changes are quite ...

Hi,

We are looking for a nice Denford Triac, preferably with the tool changer.

Please contact us on:
rorydog1@gmail.com

Regards,

Rory.