The tolerances on the waterline milling calculations have been increased further. The code base has been updated to be specific for Windows 11, so should slightly faster. The bounding box in the 3D simulation is full rectangular again without the diagonal lines across them. Sample files are stored i...

QuickCAM 2D v2.12 and LaserCAM 2D v2.10 released 2nd Jan 2025 The DXF export function is now more robust. It will be quicker, and should always work on the first attempt. As usual - check here for the latest version: QuickCam: https://www.denfordata.com/downloads/QuickCAM2DDesignv2.12.zip LaserCam: ...

The tolerances on the waterline milling calculations have been increased, so it should not take such large cuts when making small arcs.

Check here to download the latest version:
https://www.denfordata.com/downloads/qu ... ov1_29.zip

Hi Max. I've checked the installation here and it passes a virus check with both Windows and also the Sophos software that we use, so it must be a false alert.

The installation version number has also been updated to 1.38.

v1.38 - The maximum diameter and length of the billet is 200mm by default. However on the machine options page, the maximum values of both dimensions can be set by the user. Quickturn should no longer ask for admin rights to run. Find the latest version here: https://www.denfordata.com/downloads/Qui...

VR Milling v6.18 released 4th November 2024 Check here to download the latest version of software: https://denfordata.com/downloads/VRMilling_V6_18.zip // 4th November 2024 Major changes to the Trio control card motion, updating it to version 61. The movements are much quicker now when changing from...

QuickCAM PRO v1.27 released 19th August 2024

A very minor change that the installation graphics have now been changed to be the new white design and not the old salmon pink.

Check here to download the latest version:
https://www.denfordata.com/downloads/qu ... ov1_27.zip

There is a new version of 5.71 released. Its not an essential download, but does include all changes to enable modified legacy machines to run.

MAX THE MILLER wrote: ↑

Wed 24 Jul , 2024 21:11 pm

What's gone wrong? Thanks.

There is a new version of 5.71 released. This has been tested with a Router 2600, though we don't have a Triac to test against. Can you download and see if this works for you please?

https://www.denfordata.com/downloads/VR ... _V5_71.zip

Hi Max. We're currently investigating. Other than the version number and the colour scheme, the underlying code should be the same. The 5.70 release has the same functionality as the 5.71 so that can be continued to be used fine.

I have downloaded this software and loaded it onto a PC. It shows a build level of V5.70.0.872. Is that correct? Shouldn't it show as V5.71.x.xxx? Thanks, Max. Hi Max. Yes, the build should be 5.71 to match the installation. This has been updated now, and the livery changed to match version 6 as we...

VR Turning 6.19 released 8th July 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 8th July 2024 Minor improvements to how rapid moves are controlled by the Trio card. NOTE - VR Turning 6.18 was almost ready for release, then was re...

VR Turning 6.17 released 14th June 2024

Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/

// 14th June 2024
Improvement to the robot ports, and Mcode 66 and 72.

QuickTURN2D v1.36 released 29th April 2024

v1.36 - The maximum width of the billet has been increased to 200mm from 100mm.

Find the latest version here:
https://www.denfordata.com/downloads/Qu ... _v1.36.zip

QuickCAM 2D v2.11 and LaserCAM 2D v2.9 released 12th April 2024 LaserCAM and QuickCAM are resistant if an image file is uploaded which does not contain any image data. Previously it would crash. Now it just shows the image as blank. The minimum speed of the post processor simulation has been drastic...

VR Milling v6.17 released 9th April 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 9th April 2024 Acceleration on the axes has been reduced to help stalling at the highest speeds The Trio connection software works better with lang...

QuickCAM 2D v2.10 released 12th March 2024

There is an improvement to the DXF import, which can now deal with a wider range of DXF file formats.

As usual - check here for the latest version:
https://denfordata.com/downloads/QuickC ... nv2.10.zip

VR Milling v6.16 released 21st February 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 21st February 2024 Improvement to the import of DXF files. All DXFs that have been tested have all been imported, regardless of the DXF version...

VR Turning 6.16 released 5th February 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //5th February 2024 The acceleration on the X and Y axes on the Turn 270 and Turn 370 has been decreased slightly. It was occasionally possible to s...

VR Turning 6.15 released 17th October 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //17th October 2023 On machines with the manual toolchange button, it was possible to start jogging while the carousel was in motion, or to start th...