Search found 3646 matches

by Denford Admin
Mon 29 Apr , 2024 14:00 pm
Forum: QuickTURN 2D Design
Topic: QuickTURN2D v1.36 released 29th April 2024
Replies: 0
Views: 362

QuickTURN2D v1.36 released 29th April 2024

QuickTURN2D v1.36 released 29th April 2024

v1.36 - The maximum width of the billet has been increased to 200mm from 100mm.

Find the latest version here:
https://www.denfordata.com/downloads/Qu ... _v1.36.zip
by Denford Admin
Fri 12 Apr , 2024 11:55 am
Forum: QuickCAM / LaserCAM 2D Design
Topic: QuickCAM 2D v2.11 and LaserCAM 2D v2.9 released 12th April 2024
Replies: 0
Views: 866

QuickCAM 2D v2.11 and LaserCAM 2D v2.9 released 12th April 2024

QuickCAM 2D v2.11 and LaserCAM 2D v2.9 released 12th April 2024 LaserCAM and QuickCAM are resistant if an image file is uploaded which does not contain any image data. Previously it would crash. Now it just shows the image as blank. The minimum speed of the post processor simulation has been drastic...
by Denford Admin
Tue 09 Apr , 2024 11:00 am
Forum: VR Milling - All Versions
Topic: VR Milling v6.17 released 9th April 2024
Replies: 0
Views: 639

VR Milling v6.17 released 9th April 2024

VR Milling v6.17 released 9th April 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 9th April 2024 Acceleration on the axes has been reduced to help stalling at the highest speeds The Trio connection software works better with lang...
by Denford Admin
Tue 12 Mar , 2024 11:28 am
Forum: QuickCAM / LaserCAM 2D Design
Topic: QuickCAM 2D v2.10 released 12th March 2024
Replies: 0
Views: 1031

QuickCAM 2D v2.10 released 12th March 2024

QuickCAM 2D v2.10 released 12th March 2024

There is an improvement to the DXF import, which can now deal with a wider range of DXF file formats.

As usual - check here for the latest version:
https://denfordata.com/downloads/QuickC ... nv2.10.zip
by Denford Admin
Wed 21 Feb , 2024 15:24 pm
Forum: VR Milling - All Versions
Topic: VR Milling v6.16 released 21st February 2024
Replies: 0
Views: 1485

VR Milling v6.16 released 21st February 2024

VR Milling v6.16 released 21st February 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 21st February 2024 Improvement to the import of DXF files. All DXFs that have been tested have all been imported, regardless of the DXF version...
by Denford Admin
Mon 05 Feb , 2024 13:20 pm
Forum: VR Turning - All Versions
Topic: VR Turning 6.16 released 5th February 2024
Replies: 0
Views: 1581

VR Turning 6.16 released 5th February 2024

VR Turning 6.16 released 5th February 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //5th February 2024 The acceleration on the X and Y axes on the Turn 270 and Turn 370 has been decreased slightly. It was occasionally possible to s...
by Denford Admin
Tue 17 Oct , 2023 15:00 pm
Forum: VR Turning - All Versions
Topic: VR Turning 6.15 released 17th October 2023
Replies: 0
Views: 25376

VR Turning 6.15 released 17th October 2023

VR Turning 6.15 released 17th October 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //17th October 2023 On machines with the manual toolchange button, it was possible to start jogging while the carousel was in motion, or to start th...
by Denford Admin
Fri 22 Sep , 2023 12:30 pm
Forum: VR Milling - All Versions
Topic: VR Milling v6.15 released 22nd September 2023
Replies: 0
Views: 32814

VR Milling v6.15 released 22nd September 2023

VR Milling v6.15 released 22nd September 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 22nd September 2023 Major fix to the importing of DXFs when selecting the path cutting and outlines. Previously the selected cutter path was n...
by Denford Admin
Thu 13 Jul , 2023 14:23 pm
Forum: Software
Topic: Problems with OCX file not automatically registering
Replies: 8
Views: 33317

Re: Problems with OCX file not automatically registering

Hi Max. If you look in the 'Machine Easy Upgrader' directory on the CD, right click on the file Setup.exe, and choose 'Run as administrator'. Hopefully that will install correctly.
by Denford Admin
Fri 07 Jul , 2023 12:18 pm
Forum: VR Milling - All Versions
Topic: VR Milling v6.14 released 7th July 2023
Replies: 0
Views: 25008

VR Milling v6.14 released 7th July 2023

VR Milling v6.14 released 7th July 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //7th July 2023 The restore backsup offsets now reads from the correct directory. Previously it would not show any files if they were not in the defaul...
by Denford Admin
Wed 05 Jul , 2023 12:17 pm
Forum: VR Milling - All Versions
Topic: VR Milling v6.13 released 5th July 2023
Replies: 0
Views: 23871

VR Milling v6.13 released 5th July 2023

VR Milling v6.13 released 5th July 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //5th July 2023 If a design is created in QuickCAM Pro or QuickCAM 2D and then automatically sent to VR Milling, the design will only be accepted if VR...
by Denford Admin
Thu 29 Jun , 2023 12:08 pm
Forum: QuickCAM / LaserCAM 2D Design
Topic: QuickCAM 2D v2.9 released 29th June 2023
Replies: 0
Views: 32347

QuickCAM 2D v2.9 released 29th June 2023

QuickCAM 2D v2.9 released 29th June 2023 If the current machine was changed in VR Milling, and Quickcam 2D was open, QC2D wouldn't pick up on the change of machine and would keep writing to the old material library. It will now read and write to the correct material library without having to be rest...
by Denford Admin
Mon 19 Jun , 2023 14:47 pm
Forum: VR Turning - All Versions
Topic: Tool offset values corrupted when in "Inch" mode.
Replies: 1
Views: 9526

Re: Tool offset values corrupted when in "Inch" mode.

Hi Max. There is a new version of VR Turning, V1.55, which fixes the tool offset issue. The conversion from metric to imperial was being applied at the wrong time, and so the value was being multiplied every time the window was opened. It is now only applied once. https://www.denfordata.com/download...
by Denford Admin
Mon 19 Jun , 2023 13:19 pm
Forum: VR Turning - All Versions
Topic: VR Turning v1.55 released 19th June 2023
Replies: 0
Views: 24873

VR Turning v1.55 released 19th June 2023

VR Turning v1.55 released 19th June 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //19th June 2023 There was a bug on the tool offsets page where the metric>imperial calculation would be applied every time the tool window was opened...
by Denford Admin
Mon 19 Jun , 2023 12:52 pm
Forum: VR Milling - All Versions
Topic: VR Milling v6.12 released 19th June 2023
Replies: 0
Views: 24527

VR Milling v6.12 released 19th June 2023

VR Milling v6.12 released 27th June 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //27th June 2023 Update for the VNC to allow six station tool changers as well as eight station. The number of stations is definined in the machine pa...
by Denford Admin
Thu 20 Apr , 2023 12:01 pm
Forum: VR Milling - All Versions
Topic: VR Milling v6.11 released 20th April 2023
Replies: 0
Views: 25062

VR Milling v6.11 released 20th April 2023

VR Milling v6.11 released 20th April 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //20th April 2023 Offset backup and restore writes to the VR Milling 6 directory now, not the generic Denford one. Show all on the restore page shows...
by Denford Admin
Fri 03 Mar , 2023 13:31 pm
Forum: VR Milling - All Versions
Topic: VR Milling v6.9 released 3rd March 2023
Replies: 0
Views: 24932

VR Milling v6.9 released 3rd March 2023

Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/

//3rd March 2023
Tool change will always return to the correct position in both programmed and manual mode.
by Denford Admin
Mon 27 Feb , 2023 15:35 pm
Forum: VR Turning - All Versions
Topic: VR Turning v1.54 released 27th February 2023
Replies: 0
Views: 25123

VR Turning v1.54 released 27th February 2023

VR Turning v1.54 released 27th February 2023


Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/

The wizard screens are now presented again corrected in Windows 10 and 11.
by Denford Admin
Fri 17 Feb , 2023 11:30 am
Forum: VR Milling - All Versions
Topic: VR Milling v6.8 released 17th February 2023
Replies: 0
Views: 25009

VR Milling v6.8 released 17th February 2023

VR Milling v6.8 released 17th February 2023

Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/

//17th February 2023
Addition of configuration for the Compact 1000.
More consistent speeds when making linear moves.
by Denford Admin
Thu 19 Jan , 2023 11:46 am
Forum: VR Milling - All Versions
Topic: VR Milling v6.7 released 19th January 2023
Replies: 0
Views: 24860

VR Milling v6.7 released 19th January 2023

VR Milling v6.7 released 19th January 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //19th January 2023. Improvement to how the Micromill handles the EStop button. The EStop always worked and now VR Milling will report it quicker. P...