Found that on a restricted PC, if you have installed the USB driver correctly under administrator, but then connect the USB cable into a different port, Windows will lose the driver - it sees the device as being new again, being a restricted user will not then let the device load onto the new port. ...

also found that on a restricted PC, if you have installed the USB driver correctly under administrator, but then connect the USB cable into a different port, Windows will lose the driver - it sees the device as being new again, being a restricted user will not then let the device load onto the new p...

Made this yesterday for the 4x4 in schools team. Creating design just from the jpg logo was easy 8) http://www.denfordata.com/projectimages/4x4example.jpg Get the MCM file here to play with it yourself: http://www.denfordata.com/projectimages/4x4.MCM For more on the 4x4 in schools challenge, see her...

Just added a couple more machines to choose from, and enabled Routers to be selected.

Boxford post output also checked and tested - working OK !
Boxford post is a .BOX file which you need to import and convert it into a GMM file

Get it from same location as v1.0

This also seems to be appearing if you try to connect to a USB machine when it is either powered off, or the USB cable is not connected

Download a trial version here: http://www.denfordata.com/downloads/quickcam2ddesign_1_0.zip Download the product literature here: http://www.denfordata.com/pdfs/QuickCAM_2D_Design.pdf Contact us to purchase: Denford Limited Birds Royd Brighouse West Yorkshire HD6 1NB United Kingdom Telephone: + 44 (...

This usually occurs when you have selected the wrong machine.
Denford machines have different hardware and firmware types which mean the control software MUST have the correct machine type selected in order to send the correct Mint file (this is the programmable Logic)

When I connect to my machine I get the message Invalid Platform Code after the flash has been erased and the mint downloaded.

The problem is an incomptability with the latest control firmware, and older Mint files.

SOLUTION: Upgrade to latest version of VR Milling which will fix this problem

Incorrect axis configuration appears after the flash has been erased and downloaded.
This is in version 2.25, machine is RouterV5ProNS

Version 1.0 is due for release week commencing 20th Feb 2006

There are 3 items to get the Techsoft 2D software to have Denford Machines in the PLOT list 1. Techsoft 2D CD 2. Techsoft 2D 3-1/2" registration floppy with EXTENSION DENFORD written on it 3. A Denford CD or 3-1/2" floppy titled DENFORD TECHSOFT EXTENSIONS. If you just install these then the Denford...

You Must tick legacy applications in the RM stuff - otherwise get winexec failed memory low error when trying to plot to Denford machines. This is because there are some 16-bit applications / DLLs This error message may also appear when the InstallShield setup.exe program is executed over a network....

Run Techsoft then select 1. Help 2. Help Contents 3. Find 4. Type in DENFORD e.g. Design Tools – 2D Design with Denford Extension links with the Denford machine software. There are two instances at which the link takes place: When Design Tools – 2D Design with Denford Extension is started up, it loo...

Turn off the Laser at the mains and leave off for 2 minutes, then turn back on Turn the PC off and on i.e. reboot Take the Honeycomb bed out of the Laser and ensure there is no debris in the base where the location pins and electrical plug and socket are. Relocate the Honeycomb bed back in the Laser...

TIP:

To get the activation screen showing on the Versa Laser software press

SHIFT +F8

Usually means a file cannot be read

Could be the TOOL FILE and can occur when a file has been deleted or the computer has been networked etc

Download latest version of VR milling:
Find it here: http://www.denford.co.uk/technical-support.asp

Contains the new Compact 1000 and Router 2600 Virtual and real machines

btw you will need to turn on hidden files in order to find the post file:

in explorer goto Tools > Folder Options > View TAB - Show hidden files and folders