HI TOM, MANY THANKS FOR YOUR REPLY, WE HAVE A GUY WHO FIXES OUR CNC FANUC MACHINES HE SAYS THE VOLTAGES ARE ON THE CARD AND THE POWER SUPPLY WORKS BECAUSE THE 386 COMPUTER BOOTS UP. HE CANNOT DO ANYMORE ON IT WITH US BECAUSE HE IS AT A LOSS NOW AS TO WHAT TO DO WE MAY OR MAY NOT BE ELECTRONICALLY AW...

HI THERE, SORRY NOT BEEN BACK FOR A BIT,COULD NOT DOWNLOAD YOUR FILE HAVE HAD BOARD CHECKED OUT STILL SAME ERROR ON SCREEN AS POSTED BEFORE IN PICTURES. EPROM INFO IS 2.53d/STE-KC16-JD7 WE HAVE NOTHING ON THE STATUS LED , WE HAVE CHECKED THE POWER SUPPLY AND IS OK WE HAVE TRIED THE BOARD IN THE SLOT...

when i power the machine up with the ste card disconnected i get up to the message that says the mint card is disconnected when the ste card is connected i get nothing on the screen and the red small led light underneath the computer board in the back of the machine goes off. i still have no `L` lig...

Does this mean the ste board is faulty as the led light on the backplane does not illuminate ?

if there are no replacement boards available is there an upgraded board available ?

we have made sure the 10 pin is home properly and have also teted th ribbon cable there is still no led we can`t fit the board into the spare slot as the computer card ribbon bracket fouls on the motion card the psu power supply is showing =12v -12v and 5v the computer is powering up but only to tha...

no it never has.

john did give us more than one boot up disk and we have tried those

enclosed are pics of boards in and out

hi, the guy we bought it off had been running it and moved it across his workshop and then got message `following error` which i believe is something to do with the encoder ?.it then stood for a year. we bought it with that error on the screen . when we powered it up in our shop (after replacing psu...

HI AGAIN, HAVE TRIED ALLSORTS TO GET THIS UP & RUNNING TO NO AVAIL. IT IS BOOTING UP (STARTING WIN 98) BUT IT GETS TO A POINT AND ON THE SCREEN IS THE FOLLOWING ERROR (50) STE MINT CARD DISCONNECTED EGA DRIVER REMOVED KEYBOARD DRIVER REMOVED RS232 DRIVER REMOVED ERROR (128) SOFTWARE ABORTED I HAVE T...

I`M STILL WAITING FOR MY SERV ENGINEER TO PUT MY BOARD BACK IN & RECONNECT (I CAN`T REMEMBER WHERE THE SMALL RIBBON CABLE GOES) THEN I CAN TELL U EXACTLY WHAT THE ERROR MESSAGES ETC ARE. ALL I CAN SAY IS THAT THE MESSAGE IS THE SAME WHETHER THE BOARD IS IN OR OUT ! AND ON FIRST BOOT IT STARTS REMOVI...

hi there, we have tu150 with desktop tutor fitted it has a problem booting up and will not initialise . We do not know for certain , but we may have a problem with the mint controller card which was made by a company called baldor. i have sent it to them for repair/assesment but on receipt told me t...

we have a denford cyclone tu150-u and have a problem with the mint board baldor wont release the diagram for it anyone with any ideas ?