Here’s how I made a speaker box on the Denford ROUTER 2600 (It will also work on the 2600 Pro or Vertical Router). The original design was done in Solid Works to create a 3D assembly. Each individual ‘flat panel’ was then exported as a 2D .dxf file. Each .dxf file was then imported into Denford’s Qu...

Please check the guard switch is in the locked position. If not, the spindle motor will not come on even if the guard is closed. If it has been moved to the unlocked position, you must use the release tool to push the pin back in order to turn the switch back to the locked position. For further info...

I have tried scanning an object using the following values : Length of object : 155mm Step over (deg) : 0.25 Scan axis resolution : 0.25 Computer Spec : Intel Pentium 4 CPU 2.80Ghz, 504Mb RAM I could save the file as an .STL without any error message resulting in a file 87Gb. However, I was able to ...

Customer writes - once a scan was taken my PC was taking over 7 hours to produce a cutter path! I have since upgraded the PC (new 256 MB graphics card, 4GB of 8500 pc2 RAM and a E7400 2.8GHz CPU) to well beyond your recommended system requirements and still the PC is taking over 3 hours to produce a...

Does anyone know if the Denford software (QuickCAM 2D, QuickCAM 3D or QuickCAM Pro, QuickTURN 2D) is compatible with mach 3 ?
ie, is there a Mach3 post processor for Denford software ?

Many thanks for the staff at the D&T Department, Applemore College for sending in these pics.

Designed in Solid Works and then exported in QuickCAM 2D Design (via DXF)

The Rolling Pin was from IKEA - 63mm diameter 250mm long