MILL CAM DESIGNER LICENCE.

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
MAX THE MILLER
CNC Apprentice
CNC Apprentice
Posts: 97
Joined: Tue 23 Aug , 2011 18:25 pm
Hardware/Software: Denford Triac PC. VR Milling 5.51.0.616

MILL CAM DESIGNER LICENCE.

Post by MAX THE MILLER » Thu 13 Oct , 2011 21:46 pm

I have recently purchased a TRIAC PC which came with floppies for VR Milling 2 and Mill Cam designer. VR Milling runs fine as I used the licence floppy when installing it. Mill Cam Designer prompts me for the dongle, but the dongle I have is the wrong one, being for VR Robot.

How can I obtain a licence for Mill Cam Designer?

Thanks.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: MILL CAM DESIGNER LICENCE.

Post by bradders » Wed 19 Oct , 2011 10:12 am

Contact Denfords - 01484 728000

Note ? this is quite old and dated software now.

Post Reply