Triac Spindle head assembly drawings

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3593
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Triac Spindle head assembly drawings

Post by Denford Admin » Wed 04 Feb , 2009 10:41 am

Triac Spindle head assembly drawings
Attachments
TR1_0100.pdf
Triac manual toolchange spindle head arrangement
(100.93 KiB) Downloaded 1385 times
Tr5_0100.pdf
Triac AUTO toolchange spindle head arrangement
(118.72 KiB) Downloaded 1576 times

User avatar
Denford Admin
Site Admin
Posts: 3593
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Fri 06 Feb , 2009 16:40 pm

Here are another few drawings related to the head (these look to have been redrawn from the originals)

NB: The bearing BI00102D is a 7208B BEARING
BI00109A is a 6007ZZ
Attachments
TR1_0111.pdf
(48.4 KiB) Downloaded 1341 times
TR1_0112.pdf
(47.29 KiB) Downloaded 1127 times
TR3_0101.pdf
(100.98 KiB) Downloaded 1549 times

toby1995
Posts: 30
Joined: Sat 12 Mar , 2016 16:10 pm
Hardware/Software: Denford VR Milling
Bobcad V28 Mill/Turn CadCam software
Fanuc
Haas
Heidenhain
Inspect3D

Re: Triac Spindle head assembly drawings

Post by toby1995 » Sat 29 Oct , 2016 15:09 pm

hi there would these bearings be suitable for the triac spindle? there seems to be a lot of variations of the same bearing so i just want to be properly sure I'm ordering the correct pair. also is there a "proper" way to remove the old spindle assembly and bearings? i feel like I'm diving in at the very deep end here.

thanks

http://uk.rs-online.com/web/p/ball-bearings/2851585/

Post Reply