Here are links to our Meteor Lathe manuals:
http://www.denfordata.com/pdfs/meteor-q ... -guide.pdf (1.3Mb)
http://www.denfordata.com/pdfs/Meteor-S ... dpi-hq.pdf (45Mb)
This may also help with the PC Turning Software:
http://www.denfordata.com/pdfs/vr-turni ... -guide.pdf (6Mb)
Meteor Lathe Manuals
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: