Micromill/Microturn UK-US RS232 communication Identification

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Micromill/Microturn UK-US RS232 communication Identification

Post by bradders » Wed 14 Oct , 2009 7:22 am

How can I identify if I have UK or US specification RS232 communications on my Micromill /Microturn?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Micromill / Microturn UK-US RS232 communication Identificat

Post by bradders » Wed 14 Oct , 2009 7:27 am

There were 2 types of RS232 communication for Micromills and Microturns

1. The UK ver (Although I believe some US specification Micromills and Microturns were sold in the UK :oops: :oops: :oops: ) had the RS232 cable wiring in the external cable, this was known as a MACHINE LINK CABLE (Pt No 9-25 machine link cable (RS232) BI01812GG)
viewtopic.php?f=4&t=2352&hilit=BI01812GG
viewtopic.php?f=4&t=765

2. The US version had the RS232 cable wiring in the internal cable of the machine and was connected externally to the PC with a Simple Straight Through Cable i.e. pin to pin


Internal Machine cable details
UK Pt No BI01812A
9 Pin_______________25 Pin
Pin 3 -------Blue-------- Pin 2
Pin 2 -------Red--------- Pin 3
Pin 7 ------Yellow------ Pin 4
Pin 8 ------Green------- Pin 5
Pin 5 ------Black------- Pin 7

Internal cable details
US Pt No BI01812B
9 Pin_______________25 Pin
Pin 2 -------Red-------- Pin 2
Pin 3 -------Blue------- Pin 3
Pin 8 ------Green------ Pin 4
Pin 7 ------Yellow----- Pin 5
Pin 5 ------Black------- Pin 7

Micromill / Microturn. PC (9 Pin) to Machine (25 Pin) connection cable details
Attachments
Modem Cable Micromill - Microturn - extrenal - 9 -25.JPG
Modem Cable Micromill - Microturn - extrenal - 9 -25.JPG (49.66 KiB) Viewed 4012 times

Post Reply