There is a testimonial from a customer on our main website, but I thought the photos of what they are making on our machines would be of interest....
There are just over 100 parts inside the bank note validation machines. They prototype most (if not all?) on their Triton (the Triac successor), put all the bits together with the electronics, and run a few thousand bank notes through it to make sure the design is right.
- And yes, I have asked them how they work but they wouldn't tell me
see their website: https://www.innovative-technology.co.uk/
Innovative Technology bank note validation machines
Moderators: Martin, Steve, Mr Magoo
- Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Innovative Technology bank note validation machines
Last edited by Denford Admin on Fri 20 Apr , 2007 14:12 pm, edited 1 time in total.
- Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Some of the prototype bits.....
- Attachments
-
- Part of an automatic bank note validation machine
- innovative-gears-close-up.jpg (34.17 KiB) Viewed 4443 times
-
- Part of an automatic bank note validation machine
- innovative-prototype.jpg (33.72 KiB) Viewed 4444 times
-
- Part of an automatic bank note validation machine
- innovative-close-up.jpg (38.63 KiB) Viewed 4444 times