Help and support using the 3D and Bitmap Machining CAM packages:
QuickCAM 3D, QuickCAM 3D Pro, QuickCAM 4D (rotary axis CAM)
Moderators: Martin, Steve, Mr Magoo
-
boots
- CNC Expert
- Posts: 220
- Joined: Tue 16 Jan , 2007 21:22 pm
Post
by boots » Thu 22 Feb , 2007 21:46 pm
Getting a "range check error" message on program files that have run in the past.
Any Ideas?
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Fri 23 Feb , 2007 12:21 pm
Do you mean CNC programs or 3D STL models ?
What software do you mean (QuickCAM 3D v3 / v1 / Pro VRMilling ?)
What file are you loading ?
When does the error appear ?
-
boots
- CNC Expert
- Posts: 220
- Joined: Tue 16 Jan , 2007 21:22 pm
Post
by boots » Mon 26 Feb , 2007 17:35 pm
QuickCam V1
I think the student tried to use an image file.
The "range check error" came up just before the Calculating screen.
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Mon 26 Feb , 2007 17:43 pm
Ok - its an old problem we had on certain computers when re-sampling the bitmap image before machining.
It has been resolved now in the latest versions of QuickCAM v3, and Pro - the image is resampled diffferently, and you have the choice of low, medium and high resolution.
