Extractor not coming on

All info relating to the Denford Router 2600 and Pro CNC routers

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
unsworth
Posts: 1
Joined: Fri 11 Oct , 2019 15:25 pm
Hardware/Software: Denford 2600 Pro

Extractor not coming on

Post by unsworth » Thu 19 Dec , 2019 11:25 am

Hi, when using the 2600 the extractor does not come on, looked all over for a switch but can't find one. It is plugged in

Martin
CNC Guru
CNC Guru
Posts: 1714
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Extractor not coming on

Post by Martin » Fri 20 Dec , 2019 10:55 am

DP100 Extraction.png
DP100 Extraction.png (850.31 KiB) Viewed 762 times

Post Reply