1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Post by jamesgates1000 » Sat 09 Feb , 2019 13:05 pm

A few details...

Fanuc Servos, and OM Control, 8 tool BT30 type tool carousel.

Please note - this machine is 3 Phase

Replaced parts...

New pneumatic cylinder and valve for tool changer,
Spindle motor has been refurbished.
New spindle drive card
New Spindle Bearings
New keyboard membranes
Various broken ATC connections fixed.

Comes with...

5 x ER32 holders
5 x ER16 holders
ER25 Spanner
1 x 12mm side lock holder
1 x 40mm face mill with arbour
ER25 Collets
ER16 Collets

Tool pot for tightening tools.

100mm Vice

Set of 100mm parallels

M8 Clamp set.
Last edited by jamesgates1000 on Mon 04 Mar , 2019 10:19 am, edited 2 times in total.

Inspired_Dave
Posts: 3
Joined: Mon 14 Nov , 2016 22:26 pm
Hardware/Software: Bridgeport

Re: 1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Post by Inspired_Dave » Tue 12 Feb , 2019 19:20 pm

PM sent for more info. :)

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: 1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Post by jamesgates1000 » Wed 20 Feb , 2019 9:19 am

20190220_073116.jpg
20190220_073116.jpg (62.84 KiB) Viewed 9063 times
20190220_073130.jpg
20190220_073130.jpg (56.51 KiB) Viewed 9063 times
20190220_073231.jpg
20190220_073231.jpg (55.36 KiB) Viewed 9063 times
20190220_073205.jpg
20190220_073205.jpg (54.01 KiB) Viewed 9063 times
20190220_073209.jpg
20190220_073209.jpg (40.31 KiB) Viewed 9063 times
20190220_073223.jpg
20190220_073223.jpg (52.08 KiB) Viewed 9063 times
20190220_073136.jpg
20190220_073136.jpg (67.83 KiB) Viewed 9063 times
20190220_073343.jpg
20190220_073343.jpg (46.71 KiB) Viewed 9063 times
20190220_073358.jpg
20190220_073358.jpg (46.29 KiB) Viewed 9063 times
20190220_073404.jpg
20190220_073404.jpg (51.3 KiB) Viewed 9063 times
20190220_073409.jpg
20190220_073409.jpg (51.6 KiB) Viewed 9063 times
20190220_073242.jpg
20190220_073242.jpg (57.62 KiB) Viewed 9063 times
20190220_073307.jpg
20190220_073307.jpg (52.02 KiB) Viewed 9063 times
20190220_073317.jpg
20190220_073317.jpg (31.17 KiB) Viewed 9063 times
20190220_074059.jpg
20190220_074059.jpg (58.81 KiB) Viewed 9063 times
20190220_074149.jpg
20190220_074149.jpg (64.93 KiB) Viewed 9063 times
20190220_074200.jpg
20190220_074200.jpg (59.8 KiB) Viewed 9063 times
20190220_074326.jpg
20190220_074326.jpg (58.93 KiB) Viewed 9063 times
20190220_074756.jpg
20190220_074756.jpg (72.06 KiB) Viewed 9063 times
20190220_083154.jpg
20190220_083154.jpg (77.84 KiB) Viewed 9057 times
Last edited by jamesgates1000 on Wed 20 Feb , 2019 9:33 am, edited 1 time in total.

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: 1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Post by jamesgates1000 » Wed 20 Feb , 2019 9:30 am

20190220_074901.jpg
20190220_074901.jpg (72.63 KiB) Viewed 9059 times
20190220_074906.jpg
20190220_074906.jpg (87.81 KiB) Viewed 9059 times
20190220_074914.jpg
20190220_074914.jpg (56.99 KiB) Viewed 9059 times

Inspired_Dave
Posts: 3
Joined: Mon 14 Nov , 2016 22:26 pm
Hardware/Software: Bridgeport

Re: 1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Post by Inspired_Dave » Thu 21 Feb , 2019 19:37 pm

Could you let me know your location and asking price please? Can this be drip-fed programs?

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: 1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Post by jamesgates1000 » Mon 04 Mar , 2019 10:21 am

The machine is located in Weymouth, Dorset but I can put on a pallet for delivery.

I have always either sent small programs to the control or dripfed via EasyDNC which can be bought for £100 iirc.

opentoideas
Posts: 33
Joined: Sun 15 Mar , 2020 3:03 am

Re: 1997 Triac VMC with BT30 ATC and Fanuc O-M control for Sale

Post by opentoideas » Tue 17 Mar , 2020 1:33 am

Still got it?

PM sent

Post Reply